The production of Biomass Molding Fuel will be amounted to 50 million tons in 2020

Each year, there are about 340 million tons of straw and agricultural residues, 840 million tons of animal manure and nearly 75 million tons of urban living garbage in China, and these resources can be used as energy utilization. Total biomass resources is equivalent to about 460 million tons of standard coal each year. In accordance with the relevant national planning, by 2015, biomass energy industry will have a large-scale of utilization, realize commercialization and have large-scale use in the electric power, heat supply, and rural life.

"China's rural energy construction mainly rely on state funding to support, we call it transfusion industry, now it needs to become a hematopoietic industry." The professor of energy research institute of National energy bureau, Qin Shiping said that the rural biomass energy use target is marketization, to build the integration of urban and rural energy service system, and achieve sustainable development.

There is an engineer who engaged in biomass energy equipment manufacturing said:" To build such an energy services system is very difficult, such as our biomass energy standards has a problem. For example, in biomass molding fuel industry those have higher degree of industrialization, a nominal yield of 900 kg/h mechanical, its actual output of pellet fuel may be less than 700 kilograms, or even only 400 ~ 500 kg, and nobody would care about it, they just write down the fake data whatever they like. And the enterprise can mark mold life indicators freely." So there is still a long distance to build such an energy services system and combine it into a big energy network market-oriented operation.

It is important to note that in this exhibition, Jiangsu MuYang Biomass Company exhibited two core host machines, MUZL1610M wood pellet mill and mixers. The single output of MuYang MUZL1610M pellet mill can achieve 3 to 5 tons. According to the manager’s introduction, among MuYang’s total biomass energy market, there are about 60% comes from overseas market, it is expected to obtain a bigger development in the fields of Biomass Molding Fuel and pretreatment of raw materials in the future.

At present, the National Energy Commission and the Ministry of Agriculture are working to build Biomass Molding Fuel industry standard, including the classification standard of solid molding fuel, burner technology and the specification about key components of molding equipment. The insiders analyze that the standard will improve industry’s entry barriers and overall competitiveness, and then improve the economic benefit of biomass energy.